Get Quote
Email Us
info@labfurniture.com
Get Quote
Email Us
info@labfurniture.com
Labfurniture Equipment is a USA based company providing a comprehensive range of Laboratory Equipment for R&D, Educational and Research Laboratories. Labfurniture is committed to providing safe, reliable and high quality products that have been diligently tested and approved by a team of R&D experts.
Labfurniture not only provides good value products but also caters to the unique demands of individual customers.
Our product range includes: Autoclaves, Biochemistry Analyzer, Biosafety Cabinets, Centrifuges, Incubators, Freezers, Freeze Dryers, Fume Hoods, Glassware Washer, Hematology Analyzers, Ice Makers, Furnace, Refrigerators, Rotary Evaporators, Oven, Spectrophotometers, Test Chambers, Ultrasonic Cleaner, Water Purifier.
| Wavelength Range: | 190 to 900 nm |
| Wavelength Accuracy: | £ ±0.5 nm |
| Wavelength Repeatability: | £ 0.3 nm (single direction) |
| Spectrum Bandwidth: | 0.2 nm, 0.4 nm, 0.7nm, 1.4 nm, 2.4 nm, 5.0 nm |
| Resolution: | <40% |
| Baseline stability: | ±0.004 Abs/30 min |
| Characteristic concentration of copper: | £ 0.04 mg/ml/1% |
| Detection limit of copper: | £0.008 mg/ml |
| Background calibration ability: | Greater than 30 times |
| RS232: | including |
| Printer: | optional |
| Power supply: | 220V 3A, 50 Hz |
| Package Dimensions: | 1220×770×730 mm (Main instrument) 800×400×900 mm ( Accessories ) |
| Weight: | 160 Kg |
| Wavelength range : | 190 to 900 nm |
| Spectral bandwidth: | 0.1, 0.2, 0.4, 1.0 and 2.0 nm |
| Accuracy of the wavelength: | ±0.15 nm |
| Receptivity of the wavelength : | ≤0.04 nm |
| Baseline stability: | ≤0.002A/30 min (Cu) |
| Characteristic viscosity: | 0.02 μg/ml/1% (Cu) |
| Checking limit: | 0.004 μg/ml (Cu) |
| Preciseness: | 0.005 |
| Grating: | 1800 lines/ mm |
| Inflamer: | All-metal titanium burner |
| Atomizer : | Effective glass atomizer |
| Lamp stand: | 8 |
| D2 background correction ability: | When the background is 1 A, the background ability should be deducted not less than 50 times, self-absorption background deduction method |
| Size : | 700 mm×550 mm×450 mm |
| weight: | 75 Kg |
| Power source: | 220V±22V AC |
| Flame System: |
Acetylene air burner : 100 mm Ignition dynamic baseline drift : ≤0.006 A/30 min (Cu) Characteristic viscosity : ≤0.025 μg/ml/1% Related standard deviation of the accuracy : ≤0.5%(Cu, absorbance>0.8A) (detection limit Cu≤0.008 μg/ml) Safety system : Can Automatically cut off the gas when The pressure is not enough, The power is off, flameout and unconformity of the burner. |
| Graphite furnace: |
The highest temperature : 3000 ℃ The largest temperature rising speed : ≥2000 ℃/S Characteristic quantity : Cd≤0.5×10 to12 g<hr> Cu≤0.5×10 to 11 g Accuracy : Cu≤3% Cd≤3 % Size and weight : 550 mm×450 mm×300 mm 65 Kg |
| Power source and power: | 220 V±22 V AC 7000 W |
| Spectrum Bandwidth: | 2 nm |
| Wavelength Range: | 190 to 1100 nm |
| Monochromatic Type: | Czerny-Turner |
| Grating: | 1600 lines/mm |
| Detector: | Silicon Photocell |
| Wavelength Accuracy: | ± 0.3 nm |
| Wavelength Repeatability: | ≤ 0.1 nm |
| Wavelength Scanning Speed: | Fast, medium, and slow |
| Light Source Switching Wavelength: | 340 nm |
| Stray Light: | ≤ 0.02% (measured by NaI at 220 nm) (measured at NaNO2 at 360 nm) |
| Photometric Range: | 0.0 to 200.0% T -0.301 to 4.000 A 0.000 to 9999 C |
| Photometric Accuracy: | ± 0.3% T ± 0.002Abs (0 to 0.5A) ± 0.004Abs (0.5 to 1A) |
| Photometric Repeatability: | ≤ 0.15% T 0.001Abs (0 to 0.5A) 0.002Abs (0.5 to 1A) |
| Baseline Flatness: | ≤ ± 0.0008A(200 to 1090 nm) |
| Noise: | 100%(T) noise ≤ 0.1% (T), 0% (T) noise ≤ 0.02% (T) |
| Baseline Drift: | ± 0.0004 Abs / h |
| Power: | AC220v± 22v, 50Hz± 1Hz, 200W |
| Light Source: | Hamamatsu D2 lamp, Osram halogen tungsten lamp. |
| Com Port: | USB |
| Packing Size: | 740 mm×630 mm×450 mm |
| Weight: | 35 Kg, 0.21 m³ |
| Spectrum Bandwidth: | 0.5 nm, 1nm, 2 nm, 4 nm, 5 nm |
| Wavelength Range: | 190 to 1100 nm |
| Monochromatic Type: | Czerny-Turner |
| Grating: | 1600 lines/mm |
| Detector: | Silicon Photocell |
| Wavelength Accuracy: | ± 0.3 nm |
| Wavelength Repeatability: | ≤ 0.1 nm |
| Wavelength Scanning Speed: | Fast, medium, and slow |
| Light Source Switching Wavelength: | 340 nm |
| Stray Light: | ≤ 0.02% (measured by NaI at 220 nm) (measured at NaNO2 at 360 nm) |
| Photometric Range: | 0.0 to 200.0% T -0.301 to 4.000 A 0.000 to 9999 C |
| Photometric Accuracy: | ± 0.3% T ± 0.002Abs (0 to 0.5A) ± 0.004Abs (0.5 to 1A) |
| Photometric Repeatability: | ≤ 0.15% T 0.001Abs (0 to 0.5A) 0.002Abs (0.5 to 1A) |
| Baseline Flatness: | ≤ ± 0.0008A(200 to 1090 nm) |
| Noise: | 100%(T) noise ≤ 0.1% (T), 0% (T) noise ≤ 0.02% (T) |
| Baseline Drift: | ± 0.0004 Abs / h |
| Power: | AC220v± 22v, 50Hz± 1Hz, 200W |
| Light Source: | Hamamatsu D2 lamp, Osram halogen tungsten lamp. |
| Com Port: | USB |
| Packing Size: | 740 mm×630 mm×450 mm |
| Weight: | 35 Kg, 0.21 m³ |
| Monochromatic type: | Czerny turner |
| Focal length: | 160 mm |
| Wavelength Range: | 190 to 1100 nm |
| Band Width: | 1.8 nm |
| Wavelength Accuracy: | ±0.3 nm |
| Wavelength Repeatability: | ≤0.01 nm |
| Photometric Display Range: | 0.0 to 200 .0% T , -0.301 to 4.000 A , 0.000 to 9999 C |
| Photometric Accuracy: | ±0.3% T(0 to 100%T) / ±0.002A(0 to 0.5A) / ±0.004A(0.5A to1A) |
| Photometric Repeatability: | 0.15% T(0 to 100%T) / ±0.001A(0 to 0.5A) / ±0.002A(0.5A to 1A) |
| Photometric Mode: | T,A,C,E |
| Stray Light: | ≤0.03% τ (220nm NaI, 360 nm NaNO2) |
| Stability: | 0.0005A/h500 nm |
| Detector: | Import Silicon Photodiode |
| Scanning speed: | Fast-medium-slow |
| Power Requirement: | AC 220 V±22 50 Hz±1 Hz,200 W |
| Baseline Flatness: | ≤0.002A(200 to1090 nm) |
| Grating: | 1200 lines/mm |
| Drifting: | ≤0.0009 Abs/30 min |
| Noise: | 100 % (T)≤0.15 % (T); 0 % (T)≤0.1 % (T) |
| Dimensions(W×D×H): | 74×63×45 Cm |
| Weight: | 35 Kg |
| Monochromatic type: | Czerny turner |
| Focal length: | 160 mm |
| Wavelength Range: | 190 to 1100nm |
| Band Width: | 2 nm |
| Wavelength Accuracy: | ±0.3 nm |
| Wavelength Repeatability: | ≤0.01 nm |
| Photometric Display Range: | 0.0 to 200 .0% T, -0.301 to 4.000 A, 0.000 to 9999 C |
| Photometric Accuracy: | ±0.3% T(0 to 100%T), ±0.002A(0 to 0.5A), ±0.004A(0.5A to 1A) |
| Photometric Repeatability: | 0.15% T(0 to 100%T), ±0.001A(0 to 0.5A) / ±0.002A(0.5A to 1A) |
| Photometric Mode: | T,A,C,E |
| Stray Light: | ≤0.03% τ (220nm NaI, 360nm NaNO2) |
| Stability: | 0.0005A/h@500 nm |
| Detector: | Import Silicon Photodiode |
| Scanning speed: | Fast-medium-slow |
| Power Requirement: | AC220V±22 50Hz±1Hz,200W |
| Baseline Flatness: | ≤0.002A(200 to 1090 nm) |
| Grating: | 1200 lines/mm |
| Drifting: | ≤0.0009 Abs/30 min (250 nm and 500 nm after 2h warm-up) |
| Dimensions(W×D×H): | 74×63×45 Cm |
| Weight: | 35 Kg |
| Exciting Optical Filters: | Interface optical filter (10 nm bandwidth) |
| Wavelength: | 365 nm |
| Emission Monochromatic: | C-T diffraction grating (EM 200 to 900 nm ) |
| Wavelength Accuracy: | ±1 nm |
| Wavelength Repeatability: | ≤0.5 nm |
| Sensitivity: | S/N≥150 |
| Linearity Deviation: | ≥0.995 |
| Stability: | Better than 1.5 %/10min |
| Power: | 220V±22v 50HZ±1HZ |
| Display Value: | 0.00 to 600.0 |
| Interface: | USB2.0 |
| Size: | 550×510×365 mm |
| Weight: | 13 kg |
| Light Path: | 1mm |
| sample Volume: | 1 to 2μL |
| Detection Range: | 190 to 850 nm |
| Wavelength Range: | 190 to 1100 nm |
| Wavelength Accuracy: | ± 1nm |
| Wavelength Resolution: | 2 nm (FWHM at Hg 546 nm) |
| Accuracy of absorbance: | 0.002 Abs |
| Absorbance Accuracy: | 1% (0.76 absorbance at 350nm) |
| Absorbance Range: | 0.02 to 15Abs, equivalent to 10mm |
| Detection Time: | less than 3 s |
| Nucleic acid range: | 1 to 750 mg/μl, dsDNA |
| Protein measurement range: | 0.1 to 40 mg/ml, BSA |
| Sample measurement time: | less than 5 seconds |
| Built-in Method: | Nucleic Acid, Protein, Full Wavelength Scan |
| Machine Size: | 20×30×20 cm |
| Machine Weight: | 2.8 kg |
| Light Source: | Xenon lamp |
| Detector: | The 3684-element linear silicide CCD array |
| Optical Path: | 1/0.5/0.05 mm automatic conversion |
| Optical Range: | 190 to 1100 nm |
| Sample Volume: | 0.3 to 2.0 μl |
| Light Source: | Long-life Xenon lamp |
| Detector: | 3864 linear CCD array |
| Wavelength scanning Range: | 190 to 850 nm |
| Wavelength Accuracy: | ±1 nm |
| Wavelength Resolution: | 2 nm (FWHM Hg 546 nm) |
| Absorbance Accuracy: | 0.002 Abs |
| Absorbance Range: | 1% (0.76 absorbances at 350 nm) |
| Nucleic acid Range: | 0.002 to 300 Abs (equivalent to 10mm optical path) |
| Protein Range: | 0.4 to 15000 ng/μl (ds-DNA) |
| Detection Time: | 0.01 to 400 mg/ml (BSA) |
| Machine Size: | less than 3s |
| Weight: | 20×30×20 cm |
| Wavelength scanning Range: | 190 to 850 nm |
| Wavelength Accuracy: | ±1 nm |
| Optical Path: | 1/0.5/0.05 mm automatic conversion |
| Optical Range: | 190 to 1100 nm |
| Sample Volume: | 0.3 to 2.0 μl |
| Wavelength Resolution: | 2 nm (FWHM Hg 546n m) |
| Cuvette wavelength Range: | 200 nm to 850 nm |
| Trial cuvette Specifications (light path): | 1/2/5/10 mm |
| Cuvette minimum Volume: | 50 μl |
| Sample level Height: | 5 mm |
| Type: | Recyclable micro cuvette |
| Cuvette darkroom: | standard cuvette darkroom |
| Absorbance Accuracy: | 2 nm (FWHM Hg 546n m) |
| Absorbance Range: | 0.002 Abs |
| Nucleic acid Range: | 1% (0.76 absorbance at 350nm) |
| Protein Range: | 0.002 to 300 Abs (equivalent to 10mm optical path) |
| Detection Time: | 0.4 to 15000 ng/μl (ds-DNA) |
| Machine Size: | 0.01 to 400 mg/ml (BSA) |
| Weight: | less than 3s |
| Light Source: | 20×30×20 cm |
| Detector: | 3.5 kg |
| Wavelength Range: | 190 to 850 nm |
| Wavelength Accuracy: | ± 1 nm |
| Wavelength Resolution: | 2 nm (FWHM at Hg 546 nm) |
| Repeatability: | <± 0.5 nm |
| Light Path: | 1 mm, 0.05 mm (optical path automatic conversion) |
| Nucleic Acid measurement range: | 0.2 to 37500 mg / μl (sa DNA) |
| Protein measurement range: | 0.01 to 1120 mg / ml (BSA) |
| sample volume requirements: | 0.3 to 2 μl |
| Absorbance Accuracy: | 1% (0.76 absorbance at 350 nm) |
| Absorbance Range: | 0.002 to 300 Abs (equivalent to 10mm path length) |
| Sample measurement time: | less than 3s |
| Sample base material: | stainless steel and quartz fiber |
| Light Source: | long life pulsed xenon flash lamp |
| Detector: | 2048(CMOS) element linear silicide CCD array |
| Wavelength Range: | 190 to 850 nm |
| Wavelength Accuracy: | ± 1nm |
| Wavelength Resolution: | 2 nm (FWHM at Hg 546 nm) |
| Repeatability: | <± 0.5 nm |
| Light Path: | 1 mm, 0.05 mm (optical path automatic conversion) |
| Absorbance Accuracy: | 1% (0.76 absorbance at 350 nm) |
| Absorbance Range: | 0.002 to 300Abs (equivalent to 10mm path length) |
| sample volume Requirements: | 0.3 to 2 μl |
| Cuvette Specifications: | 1 mm, 2 mm, 5 mm, 10 mm |
| (optical path): | |
| Min sample volume of the cuvette: | 20 μl |
| The minimum height of the cuvette sample: | 5 mm |
| Temperature Control: | 4 to 42 ℃ thermostat adjustable temperature error <± 0.5 ℃ |
| Nucleic Acid measurement range: | 0.2 to 37500 mg / μl (sa DNA) |
| Protein measurement range: | 0.01 to 1120 mg / ml (BSA) |
| Sample measurement time: | less than 3s |
| Sample base material: | stainless steel and quartz fiber |
| Light Source: | long life pulsed xenon flash lamp |
| Detector: | 2048(CMOS) element linear silicide CCD array |
| Wavelength Range: | 900 to 1700 nm |
| Wavelength Accuracy: | ±1 nm |
| Wavelength Reproducibility : | ≤1 nm |
| Wavelength Scanning Interval Absorbance: | 1 nm, 4 nm, 8 nm, 16 nm |
| Reproducibility S/N: | 0.002 A (at 0.4 A) |
| Scanning Time: | ≥ 103 (at 1500 nm) |
| Application Field: | ≤2 min |
| Optical system: | Liquid dope samples |
| Detector : | grating monochromatic InGaAs |
| Interface: | RS232 serial port |
| Dimensions: | 570×370×240 mm |
| Weight: | 18 Kg |
| Photometry: | Split Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 2 nm |
| Wavelength Range: | 190 to 1100 nm |
| Wavelength Accuracy: | ± 0.5 nm |
| Wavelength Repeatability: | ≤ 0.2 nm |
| Photometric Range: | 0.0 to 200.0% T -0.301 to 4.000A 0.000 to 9999C |
| Photometric Accuracy: | ± 0.3% T ± 0.002Abs (0 to 0.5A) ± 0.004Abs (0.5 to 1A) |
| Photometric Repeatability: | ≤ 0.15% T 0.001Abs (0 to 0.5A) 0.002Abs (0.5 to 1A) |
| Wavelength Scanning Speed: | Fast, medium, slow |
| Baseline Flatness: | ≤ ± 0.002 A |
| Stray Light: | ≤ 0.03% (measured by NaI at 220 nm) (measured at NaNO2 at 360 nm) |
| Noise: | 100%(T) noise ≤ 0.15% (T), 0% (T) noise ≤ 0.1% (T) |
| Baseline Drift: | ± 0.0009 Abs / h (250 nm and 500 nm after preheat warm up for 2 hours ) |
| Power: | AC 220 V± 22 V, 50 Hz± 1 Hz, 200 W |
| COM Port: | USB |
| Packing Size: | 740 mm×630 mm×450 mm |
| Weight: | 0.21m³, 35kg |
| Photometry: | Split Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 2 nm |
| Wavelength Range: | 190 to 1100 nm |
| Wavelength Accuracy: | ± 0.5 nm |
| Wavelength Repeatability: | ≤ 0.2 nm |
| Photometric Range: | 0.0 to 200.0% T -0.301 to 4.000A 0.000 to 9999C |
| Photometric Accuracy: | ± 0.3% T ± 0.002Abs (0 to 0.5A) ± 0.004Abs (0.5 to 1A) |
| Photometric Repeatability: | ≤ 0.15% T 0.001Abs (0 to 0.5A) 0.002Abs (0.5 to 1A) |
| Wavelength Scanning Speed: | - |
| Baseline Flatness: | - |
| Stray Light: | ≤ 0.05% (measured by NaI at 220 nm) (measured at NaNO2 at 360 nm) |
| Noise: | 100%(T) noise ≤ 0.15% (T), 0% (T) noise ≤ 0.1% (T) |
| Baseline Drift: | ± 0.0009 Abs / h (250 nm and 500 nm after preheat warm up for 2 hours ) |
| Power: | AC 220 V± 22 V, 50 Hz± 1 Hz, 200 W |
| COM Port: | USB |
| Packing Size: | 740 mm×630 mm×450 mm |
| Weight: | 0.21m³, 35kg |
| Photometry: | Split Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 2 nm |
| Wavelength Range: | 325 to 1100 nm |
| Wavelength Accuracy: | ± 0.5 nm |
| Wavelength Repeatability: | ≤ 0.2 nm |
| Photometric Range: | 0.0 to 200.0 % T -0.301 to 4.000 A 0.000 to 9999 C |
| Photometric Accuracy: | ± 0.5 % T |
| Photometric Repeatability: | ≤ 0.2 % T |
| Wavelength Scanning Speed: | Fast, medium, slow |
| Baseline Flatness: | ≤ ± 0.002 A |
| Stray Light: | ≤ 0.05 % (measured at NaNO2 at 360 nm) |
| Noise: | 100%(T) noise ≤ 0.2% (T), 0% (T) noise ≤ 0.1% (T) |
| Baseline Drift: | ± 0.0009 Abs / h ( 500 nm after preheat warm up for 2 hours ) |
| Power: | AC 220 V± 22 V, 50 Hz± 1 Hz, 120 W |
| COM Port: | USB |
| Packing Size: | 740 mm×630 mm×450 mm |
| Weight: | 0.21m³, 35kg |
| Photometry: | Split Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 2 nm |
| Wavelength Range: | 325 to 1100 nm |
| Wavelength Accuracy: | ± 0.5 nm |
| Wavelength Repeatability: | ≤ 0.2 nm |
| Photometric Range: | 0.0 to 200.0 % T -0.301 to 4.000 A 0.000 to 9999 C |
| Photometric Accuracy: | ± 0.5 % T |
| Photometric Repeatability: | ≤ 0.2 % T |
| Wavelength Scanning Speed: | - |
| Baseline Flatness: | - |
| Stray Light: | ≤ 0.05 % (measured at NaNO2 at 360 nm) |
| Noise: | 100%(T) noise ≤ 0.2% (T), 0% (T) noise ≤ 0.1% (T) |
| Baseline Drift: | ± 0.0009 Abs / h ( 500 nm after preheat warm up for 2 hours ) |
| Power: | AC 220 V± 22 V, 50 Hz± 1 Hz, 120 W |
| COM Port: | USB |
| Packing Size: | 740 mm×630 mm×450 mm |
| Weight: | 0.21m³, 35kg |
| Photometry: | Single Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 2nm |
| Wavelength Range: | 190 to 1100 nm |
| Wavelength Accuracy: | ± 1 nm |
| Wavelength Repeatability: | ≤ 0.5 nm |
| Photometric Range: | 0.0 to 200.0% T, -0.301 to 4.000A, 0.000 to 9999C |
| Photometric Accuracy: | ± 0.3% T, ± 0.002Abs (0 to 0.5 A) ± 0.004Abs (0.5 to 1 A) |
| Photometric Repeatability: | ≤ 0.15% T, 0.001Abs (0 to 0.5 A) 0.002Abs (0.5 to 1 A) |
| Wavelength Scanning Speed: | Fast, medium, slow |
| Baseline Flatness: | ≤ ± 0.003 A(200 to 1090 nm) |
| Stray Light: | ≤ 0.1% ( at 220 nm NaI ; at 360 nm NaNO2) |
| Noise: | 100%(T) noise ≤ 0.5% (T), 0% (T) noise ≤ 0.2% (T) |
| Baseline Drift: | ± 0.002 Abs / 30 mins (250 nm and 500 nm after preheating warm-up for 2 hours ) |
| Power: | AC220 V ± 22 V, 50Hz ± 1Hz, 180 W |
| Packing Size: | 630 mm×610 mm×500 mm |
| Weight: | 0.16m³, 25 Kg |
| Photometry: | Single Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 2nm |
| Wavelength Range: | 190 to 1100 nm |
| Wavelength Accuracy: | ± 1 nm |
| Wavelength Repeatability: | ≤ 0.5 nm |
| Photometric Range: | 0.0 to 200.0% T, -0.301 to 4.000A, 0.000 to 9999C |
| Photometric Accuracy: | ± 0.3% T, ± 0.002Abs (0 to 0.5 A) ± 0.004Abs (0.5 to 1 A) |
| Photometric Repeatability: | ≤ 0.15% T, 0.001Abs (0 to 0.5 A) 0.002Abs (0.5 to 1 A) |
| Wavelength Scanning Speed: | - |
| Baseline Flatness: | - |
| Stray Light: | ≤ 0.1% ( at 220 nm NaI ; at 360 nm NaNO2) |
| Noise: | 100%(T) noise ≤ 0.5% (T), 0% (T) noise ≤ 0.2% (T) |
| Baseline Drift: | ± 0.002 Abs / 30 mins (250 nm and 500 nm after preheating warm-up for 2 hours ) |
| Power: | AC220 V ± 22 V, 50Hz ± 1Hz, 180 W |
| Packing Size: | 630 mm×610 mm×500 mm |
| Weight: | 0.16m³, 25 Kg |
| Photometry: | Single Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 4 nm |
| Wavelength Range: | 325 to 1100 nm |
| Wavelength Accuracy: | ± 1 nm |
| Wavelength Repeatability: | ≤ 0.5 nm |
| Photometric Range: | 0.0 to 200.0 % T<hr> -0.301 to 4.000 A<hr> 0.000 to 9999 C |
| Photometric Accuracy: | ± 0.3% T, ± 0.002Abs (0 to 0.5 A)<hr> ± 0.004Abs (0.5 to 1 A) |
| Photometric Repeatability: | ≤ 0.15% T, 0.001Abs (0 to 0.5 A)<hr> 0.002Abs (0.5 to 1 A) |
| Wavelength Scanning Speed: | Fast, medium, slow |
| Baseline Flatness: | ≤ ± 0.003 A(335 to 1090 nm) |
| Stray Light: | ≤ 0.1% T(measured at NaNO2 at 360 nm) |
| Noise: | 100%(T) noise ≤ 0.5% (T), 0% (T) noise ≤ 0.2% (T) |
| Baseline Drift: | ± 0.002 Abs / 30 mins ( 500nm after preheat warm up for 2 hours ) |
| Power: | AC220 V ± 22 V, 50Hz ± 1Hz, 100 W |
| Packing Size: | 630 mm×610 mm×500 mm |
| Weight: | 0.16m³, 25 Kg |
| Photometry: | Single Beam |
| Monochromatic Type: | Czerny-Turner |
| Focal Length: | 160 mm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Spectrum Bandwidth: | 4 nm |
| Wavelength Range: | 325 to 1100 nm |
| Wavelength Accuracy: | ± 1 nm |
| Wavelength Repeatability: | ≤ 0.5 nm |
| Photometric Range: | 0.0 to 200.0 % T -0.301 to 4.000 A 0.000 to 9999 C |
| Photometric Accuracy: | ± 0.3% T, ± 0.002Abs (0 to 0.5 A)<hr> ± 0.004Abs (0.5 to 1 A) |
| Photometric Repeatability: | ≤ 0.15% T, 0.001Abs (0 to 0.5 A)<hr> 0.002Abs (0.5 to 1 A) |
| Wavelength Scanning Speed: | - |
| Baseline Flatness: | - |
| Stray Light: | ≤ 0.1% T(measured at NaNO2 at 360 nm) |
| Noise: | 100%(T) noise ≤ 0.5% (T), 0% (T) noise ≤ 0.2% (T) |
| Baseline Drift: | ± 0.002 Abs / 30 mins ( 500nm after preheat warm up for 2 hours ) |
| Power: | AC220 V ± 22 V, 50Hz ± 1Hz, 100 W |
| Packing Size: | 630 mm×610 mm×500 mm |
| Weight: | 0.16m³, 25 Kg |
| Photometry: | Single beam |
| Monochromatic Type: | Littrow |
| Focal Length: | 160 mm |
| Wavelength Setting: | Manual Turn Knob |
| Wavelength Range: | 325 to1000 nm |
| Wavelength Accuracy: | ± 2 nm |
| Wavelength Repeatability: | ≤ 1 nm |
| Cuvette Holder Size: | 10 mm |
| Photometric Range: | 0.0 to 100.0% T, 0 to 1.999A, 0 to 1999C |
| Photometric Accuracy: | ± 0.5% T |
| Photometric Repeatability: | ≤ 0.2% T |
| Spectrum Bandwidth: | 2 nm |
| Grating: | 1200 lines/mm |
| Detector: | Silicon Photocell |
| Stray Light: | ≤ 0.1% ( at 360 nm NaNO2 ) |
| Noise: | 100%(T) noise ≤ 0.3% (T), 0% (T) noise ≤ 0.2% (T) |
| Drift: | ± 0.5% T/3 min |
| Power: | AC220v±22v,50Hz± 1Hz, 80W |
| Packing Size: | 580×460×340 mm |
| Weight: | 0.1CBM, 14 Kg |
| Analysis Principle: | Energy-dispersive X-ray fluorescence analysis |
| Element Measuring Range: | Any element from Na(11)-U(92) |
| Minimum Measuring Limit: | Cd/Hg/Br/Cr/Pb≤2 ppm |
| Sample Shape: | Arbitrary size, any irregular shape |
| Sample Type: | Plastic/metal/film/powder/liquid etc. |
| X-Ray Tube: |
Target Material : Mo Tube Voltage : 5 to 50 KV Tube Current : 1 to 1000 A |
| Sample Exposure Diameter: | 2, 5, 8 mm |
| Detector: | Si-PIN or SDD detector, high-speed pulse height analysis system |
| SDD Detector: |
Resolution : < 145 eV Counting Rate : > 1000/S Crystal Area : > 15 mm2 Beryllium Window Thickness : 0.025 mm Detector Power : < 1.2 W |
| High Voltage Generator: | Special HV generator for X fluorescence |
| Adc: | 2048 channels |
| Filter: | 6 filters |
| Sample Observation: | 200×color CCD camera |
| Analysis Time: | 30 to 900seconds, adjustable |
| System Power Control: | +5 VDC at 250 mA (1.2 W) |
| Constant Cooling Control: | 400 VDC |
| Channels: | 2048 |
| Input: | 85 to 265VAC,47 to 63 Hz |
| Voltage Variation: | 0.0001 |
| Current Variation: | 0 to rated power |
| Temperature Variation: | voltage or current setting |
| Stability: | 0.05%/8 h |
| Working Environment: | Temperature 10 to 35 ˚C<hr> Humidity 30 to 70% RH |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 300×300×275 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 500 W |
| Dimension: | 570×530×460 mm |
| Weight: | 28 kg |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 415×375×345 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 1000 W |
| Dimension: | 690×610×530 mm |
| Weight: | 39 kg |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 550×370×520 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 1500 W |
| Dimension: | 720×700×720 mm |
| Weight: | 58 kg |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 800×800×1000 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 5000 W |
| Dimension: | 940×1090×1380 mm |
| Weight: | 150 kg |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 350×350×350 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 500 W |
| Dimension: | 620×630×520 mm |
| Weight: | 34 kg |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 450×350×450 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 1000 W |
| Dimension: | 620×710×620 mm |
| Weight: | 48 kg |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 550×450×550 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 1500 W |
| Dimension: | 720×780×750 mm |
| Weight: | 64 kg |
| Temperature Range: | 50 to 300 ℃ |
| Temperature Resolution: | 0.1 ℃ |
| Temperature Fluctuation: | ±1 ℃ |
| Timer: | 0 to 999 min |
| Working Size: | 500×600×750 mm |
| Voltage: | 110V 60Hz /220V 50 Hz |
| Power: | 2000 W |
| Dimension: | 770×840×980 mm |
| Weight: | 80 kg |
| Temperature Range: | 50 ℃ to 250 ℃ |
| Temperature Fluctuation: | +5 ℃ |
| Power: | ±1 ℃ |
| Consumed Power: | 220 V 50 HZ |
| Dimensions: | 300 W |
| Temperature Range: | 50 ℃ to 250 ℃ |
| Temperature Fluctuation: | +5 ℃ |
| Power: | ±1 ℃ |
| Consumed Power: | 220 V 50 HZ |
| Dimensions: | 500 W |
| Temperature Range: | 50 ℃ to 250 ℃ |
| Temperature Fluctuation: | +5 ℃ |
| Power: | ±1 ℃ |
| Consumed Power: | 220 V 50 HZ |
| Dimensions: | 800 W |
| Temperature Range: | 50 ℃ to 250 ℃ |
| Temperature Fluctuation: | +5 ℃ |
| Power: | ±1 ℃ |
| Consumed Power: | 220 V 50 HZ |
| Dimensions: | 1500 W |
| Temperature Range: | 50 ℃ to 250 ℃ |
| Temperature Fluctuation: | +5 ℃ |
| Power: | ±1 ℃ |
| Consumed Power: | 220 V 50 HZ |
| Dimensions: | 2000 W |
| Range of Temperature Control: | RT+10 to 200℃ |
| Vacuum Degree: | <133Pa |
| Temperature Fluctuation: | ±1% |
| Tray: | 1 |
| Electrical Date: | 220V,50HZ |
| InputPower: | 500W |
| Material of Working Chamber: | Stainless steel |
| Working Size: | 300×300×275 mm |
| Overall Dimension: | 610×510×490 mm |
| Range of Temperature Control: | RT+10 to 200℃ |
| Vacuum Degree: | <133Pa |
| Temperature Fluctuation: | ±1% |
| Tray: | 1 |
| Electrical Date: | 220V,50HZ |
| InputPower: | 500W |
| Material of Working Chamber: | Stainless steel |
| Working Size: | 300×300×275 mm |
| Overall Dimension: | 610×510×490 mm |
| Range of Temperature Control: | RT+10 to 200℃ |
| Vacuum Degree: | <133Pa |
| Temperature Fluctuation: | ±1% |
| Tray: | 2 |
| Electrical Date: | 220V,50HZ |
| InputPower: | 1400W |
| Material of Working Chamber: | Stainless steel |
| Working Size: | 415×345×370 mm |
| Overall Dimension: | 590×490×450 mm |
| Range of Temperature Control: | RT+10 to 200℃ |
| Vacuum Degree: | <133Pa |
| Temperature Fluctuation: | ±1% |
| Tray: | 2 |
| Electrical Date: | 220V,50HZ |
| InputPower: | 1400W |
| Material of Working Chamber: | Stainless steel |
| Working Size: | 415×345×370 mm |
| Overall Dimension: | 590×490×450 mm |
| Range of Temperature Control: | RT+10 to 200℃ |
| Vacuum Degree: | <133Pa |
| Temperature Fluctuation: | ±1% |
| Tray: | 2 |
| Electrical Date: | 220V,50HZ |
| InputPower: | 1400W |
| Material of Working Chamber: | Stainless steel |
| Working Size: | 450×450×450 mm |
| Overall Dimension: | 610×680×1460 mm |
